Latest Released Xprog V6.12 ELDB Add more function XPROG-M ECU Programmer With USB Dongle Software V6.12 Firmware V5.4 Top 5 Reasons to Get Newest XPROGV6.12:
New Generation Hardware, runs more steady and faster than oldversion.
Latest software version: V6.12 ,Firmware V5.4
Language: English
Operating system: WinXP/Win7/Win8
Add More Authoirzation than old version:
Add new authorization:
AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9
AUTH-0028-3 Renesas RL78Authorized and AUTH-0028-4 Renesas M32C Authorized(New Add)
XPROG V6.12 using tips: 1.XPROG V6.12 dongle isn't compatible with older version Xprog. You are not allowed to update from the older version Xprog V5.55 V5.60 V5.70 V5.84 to this newest V6.12 XPROG-M Dongle.
2. Please Close all anti-virus software in your computer, becaUse the anti-virus software will kill Xprog V6.12 driver and software. 3. Disconnect internet. Or V6.12 XPROG-M hardware may be damaged . 4. Uninstall all the old version XPROG software before you install V6.12 software, because XPROG V6.12 hardware is not compatible with other version XPROG software. Otherwise the hardware will be damaged and its warranty will be invalid. 5. Never try to UPDATE it, the hardware will be damaged if you try to update it online. Warranty will be invalid Install Notice: Please windows system required as below: 1.Windows system should be windows XP 32bit OR windows 7 64 bit, all the patchsoftware for the windows system should be installed already and the windowsproperly works well...
2.The windows system should be with at lest 2 partitions (except the CD ROM.)
3.Can not be working with virtual harddisk.
Install Steps Manual:
1.Click the file "installation.reg", get the file information to theregedit.
2.Install the file "AdbeRdr11000_zh_CN.exe", it is a must, otherwisethe Xprog software will not start.
3.Plug the Xprog main interface to the computer, install the USB driver.
4.Copy the folder "XPROG-BOX6.12" to the desktop, and open it, and runthe "xprogdesktop.exe", then software open.
XPROG V6.12 Authorizations: AUTH-0001Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM) AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM) AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROMand flash memory) AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows toread/write EEPROM) AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization(allows to read/write secured EEPROM and flash memory) AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state. AUTH-0008 BMW EWS3 authorization AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flashmemory) AUTH-0010 MB ZGS001 authorization AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypasssecurity bit and read EEPROM and RAM memory) AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory) AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash) AUTH-0015 MPC5xx authorization (depending on device program automaticallydetects MPC5xx, M95xxx device type, flash, external flash and configurationmemory size) AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization(allows to read/write secured EEPROM and flash memory) AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/writeinternal flash and external serial EEPROM) AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows toread/write secured and non-secured internal flash and external serial EEPROM,view /change mileage, Chassis number (VIN), serial number and PIN code). AUTH-0023-1 MAC7xxx AUTH-0023-2 XC23xx AUTH-0024-1 MC9S12Cxx AUTH-0024-2 MC9S12XE AUTH-0024-3 9S12XE SECURITY AUTH-0024-4 MC9S12HA/HY/P AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13 AUTH-0027-1HC(S)908 update Authorized 2016/3/13
AUTH-0027-2HC(S)908 sercurity Authorized 2016/3/13
AUTH-0028-1Renesas V850 Authorized 2017/10/9
AUTH-0028-2Renesas SuperH Authorized 2017/10/9
AUTH-0028-3Renesas RL78 Authorized ---New!
AUTH-0028-4Renesas M32C Authorized ---New!
XPROG-M V6.12 Adapters Newly Added:
XPROG-M V6.12 Adapters included:
ADP-0001 TMS370 PLCC28 programming adapter ADP-0002 TMS370 PLCC44 programming adapter ADP-0003 TMS370 PLCC68 programming adapter ADP-0004 Motorola HC05B/X PLCC52 programming adapter ADP-0005 Motorola HC05B/X QFP64 programming adapter ADP-0006 ST M35080 in-circuit programming adapter ADP-0008 TMS374 family in-circuit programming adapter ADP-0009 MC68HC05V12 programming adapter ADP-0010 TMS374 on-board programming adapter ADP-0011 HC11EA9/E9 programming adapter ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass securityadapter Additional adaptor for 5M48H P-FlashADP-0019Rev.A EWS3 adaptor EEPROM adaptor QFP28 adaptor QFP64 adaptor QFP80 adaptor QFP112 adaptor QFP144 adaptor Package List:
1pc x XPROG-Box Hardware (Aluminum Enclosure)
19pc x Adapters Set 1pc x USB Cable 1pc x 16Pin cable 1pc x CD with XPROG-Box Software (V6.12) |
XPROG-M V5.84 Highlights:
1. Latest software version: V5.84 , Firmware:V4.42. With USB Dongle, No need to activate,more secure&protect software. 3. Add new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9 4. Language: English 5. Newest version can decrypt new version For BMW CAS4 Install Notice: XPROG-M V5.84 windows system required as below: 1. Windows system should be windows XP 32bit OR windows 7 64 bit, all the patch software for the windows system should be installed already and the windows properly works well... 2. The windows system MUST be with at lest 2 partitions (except the CD ROM.),can not work if only one space in computer. 3. Can not be working with virtual harddisk. XPROG-M V5.84 Install Manuals: 1. Click the file "installation.reg", get the file information to the regedit. 2. Install the file "AdbeRdr11000_zh_CN.exe", it is a must, otherwise the Xprog software will not start. 3. Plug the Xprog main interface to the computer, install the USB driver. 4. Copy the folder "XPROG-BOX5.84" to the desktop, and open it, and run the "xprogdesktop.exe", then software open. 5. Please Close Anti-virus programmer before run software. 6. If CD broken in shipping way ,please feel free to CONTACT US to send you download weblink. XPROG-M V5.84 using tips: 1. You are not allowed to use this newest dongle to update the older version Xprog to V5.84 2. Close all of the computer anti-virus software. If not, X-prog software may be killed. 3. Disconnect the internet. If not, the internet maybe damage the hardware. 4. Uninstall all of the old version xprog-m or xprog box software before you install V5.84 software we provide, because our xprog-box hardware is not compatible with other lower or higher version software, otherwise the hardware will be damaged and will lose its warranty... 5. Never try to UPDATE, the hardware will be damaged if you want to try to update it online, then you will lose its warranty. XPROG-M V5.84 Authorizations: AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM) AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM) AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM) AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory) AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM) AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory) AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state. AUTH-0008 BMW EWS3 authorization AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory) AUTH-0010 MB ZGS001 authorization AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory) AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory) AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash) AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size) AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory) AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM) AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage, Chassis number (VIN), serial number and PIN code). AUTH-0023-1 MAC7xxx AUTH-0023-2 XC23xx AUTH-0024-1 MC9S12Cxx AUTH-0024-2 MC9S12XE AUTH-0024-3 9S12XE SECURITY AUTH-0024-4 MC9S12HA/HY/P AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13 AUTH-0027-1 HC(S)908 update Authorized 2016/3/13 AUTH-0027-2 HC(S)908 sercurity Authorized 2016/3/13 AUTH-0028-1 Renesas V850 Authorized 2017/10/9 AUTH-0028-2 Renesas SuperH Authorized 2017/10/9 XPROG-M V5.84 Adapters: ADP-0001 TMS370 PLCC28 programming adapter ADP-0002 TMS370 PLCC44 programming adapter ADP-0003 TMS370 PLCC68 programming adapter ADP-0004 Motorola HC05B/X PLCC52 programming adapter ADP-0005 Motorola HC05B/X QFP64 programming adapter ADP-0006 ST M35080 in-circuit programming adapter ADP-0008 TMS374 family in-circuit programming adapter ADP-0009 MC68HC05V12 programming adapter ADP-0010 TMS374 on-board programming adapter ADP-0011 HC11EA9/E9 programming adapter ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter Additional adaptor for 5M48H P-Flash ADP-0019 Rev.A EWS3 adaptor EEPROM adaptor QFP28 adaptor QFP64 adaptor QFP80 adaptor QFP112 adaptor QFP144 adaptor Package List: 1 x XPROG-Box Hardware (Aluminum Enclosure) 20x Adapters Set 1 x USB Cable. 1 x USB Dongle 1 x CD Software V5.84 |
XPROG M V5.55 Full Adapters Black Metal Box
Highlight of XPROG 5.55: New Software Version:V5.55
V5.55 Especially For BMW CAS4 DECYPATION System Requirement:Windows XP/WIN7 32bits Only (close an-virus program,or soft ware attacked) Add new authorization: AUTH-0025 Authorized 11/4/2014 Without USB Dongle,Software is not encrypted.Feel free to install software.
Note For XPROG V5.55: 1.Old Version like V5.0/V5.3 tool ,it can not use with this V5.55 . 2.Disconnect internet when run soft ware ,otherwise device will damaged. 3.Don't update online, or hardware broken and can not work any more. 4.Please unistall all old Xprog version clearly ,and make sure install Our XPROG 5.55 only into your PC only . Please read and following those tips when install Xprog V5.55,otherwise hardware can not use any more . XPROG-M V5.55 Authorizations: AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM) AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM) AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM) AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory) AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM) AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory) AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state. AUTH-0008 BM EWS3 authorization AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory) AUTH-0010 MB ZGS001 authorization AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory) AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory) AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash) AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size) AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory) AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM) AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, viewange mileage,chassis number (VIN), serial number and PIN code). AUTH-0023-1 MAC7xxx AUTH-0023-2 XC23xx AUTH-0024-1 MC9S12Cxx AUTH-0024-2 MC9S12XE AUTH-0024-3 9S12XE SECURITY AUTH-0024-4 MC9S12HA/HY/P AUTH-0025-1 MPC/SPC5xxx Authorized 11/4/2014 XPROG-M V5.55 Adapters: ADP-0001 TMS370 PLCC28 programming adapter ADP-0002 TMS370 PLCC44 programming adapter ADP-0003 TMS370 PLCC68 programming adapter ADP-0004 Motorola HC05B/X PLCC52 programming adapter ADP-0005 Motorola HC05B/X QFP64 programming adapter ADP-0006 ST M35080 in-circuit programming adapter ADP-0008 TMS374 family in-circuit programming adapter ADP-0009 MC68HC05V12 programming adapter ADP-0010 TMS374 on-board programming adapter ADP-0011 HC11EA9/E9 programming adapter ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter Additional adaptor for 5M48H P-Flash Computer Requires: Processor: INTEL Pentium 60MHz or faster (depends on operating system) Memory (RAM): 64MB (depends on operating system) Hard drive: 20MB free space Communication: One free physical COM or USB port Operating system: Microsoft Windows NT/ME/2000/XP/VISTA/WIN7 32Bits Only Package List:
1 x XPROG Unit
|