JDiag BT-100 Battery Electrical System Circuit Tester BT100 Auto Diagnostics Tool Update of PS100 YD208 PT150

JDiag BT-100 is a new product from Jdiag company, it is a Battery Electrical System Circuit Tester, can test car battery voltage, 

AC and DC voltage, resistance, resistance, leakage, short circuit, components activation etc.

General Description:

It is the best electrical tester for reducing diagnostic time in all 6- to 30-volt vehicle electrical systems. After a simple hook-up of the tool to the vehicle's battery, you can:

1. Tetermine at a glance if a circuit is positive, negative, or open without having to reconnect clips from one battery pole to another.

2. Test for continuity with its built-in auxiliary ground lead.

3. By depressing the power switch, conduct a positive or negative battery current to the probe tip for testing the function of an electrical component without the use of jumper wires.

4. Test for poor ground contacts instantly without performing voltage drop tests. The tool is also short-circuit protected, its internal circuit breaker will trip if it becomes overloaded.

5. Follow and locate short circuits without wasting fuses. The tool's long cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds.

JDiag Series New item car battery Tester BT-100 Features:

1. Tiny deviation and more precise testing data

2. Can protect the circuit when power supply is r-eversed

3. Support wide input voltage range from 9V to 70V

4. Multi-languages, minority languages also can be customized

5. Large battery clip, can carry more load

6. 10 meter diagnostic cable, environmental protection material, Not pungent

7. Support 12V cars and 24V trucks

8. Overload protection, reset automatically after overload, no need operation

9. Nylon waterproof and oil proof Portable bag

10. Completely independent of personalized exquisite appearance

11. Low power consumption, high performance

12. Support personalized customization and OEM orders.

Specifications

1. Display: TFT color display (160 x 128 dpi)

2. Operating Temperature: 0 to 60°C (32 to 140 F°)

3. Storage Temperature: -40 to 70°C (-40 to 185 F°)

4. External Power: 12.0 or 24.0 V power provided via vehicle battery

5. Dimensions: Length 165 mm * Width 40 mm * Height 27 mm

Test Tool Specifications

DC voltage range : 0-65V +1 digit

Resistance range : 0-200 K ohm

Frequency response of tone pass through

0Hz to 10K hz.

Circuit Breaker

Rating current: 1-10 Amp

Testing Standard

100% current : no trip

150% current: trip in one hour

200% current: trip in 3-30 seconds.

300% current: trip in 0.5-4.0 seconds.

Package:

1pc x JDiag BT-100 Interface

1pc x User’s Manual

1pc x Cigarette lighter adapter

1pc x Battery hookup clips

1pc x Probe tip

1pc x 10m. extension cable

1pc x Well designed case

1pc x Nylon Portable bag